MicroAnalytix - New Zealand-Machery Nagel

Since 1911 MACHEREY-NAGEL represents high quality,innovation, and reliability in biomolecular and chemical innovation, and reliability in biomolecular and chemical the cornerstones of our corporate success for over 100 years.The family-owned business is being run by the fourth generation.

Micro-insert, N 8|N 11, 5.0x29.0 mm, 0.1 mL, conical, clear, spring 702824

702824

Insert for small opening vials, clear, with plastic spring 0.1 mL 5 x 29 mm

Micro-insert, N 8|N 11, 5.0x31.0 mm, 0.1 mL, conical, 15 mm tip, clear 702968

702968

Insert for vials with small opening, clear, conical, 15 mm tip 0.1 mL 5 x 31 mm

Micro-insert, N 8|N 11, 5.0x31.0 mm, 0.15 mL, conical, 9 mm tip, clear 702968.1

702968.1

Insert for small opening vials, clear, conical, 9 mm tip 0.15 mL 5 x 31 mm 100

Micro-insert, N 8|N 11, 5.0x31.0 mm, 0.25 mL, flat bottom, clear 702005

702005

Insert for small opening vials, clear, flat bottom 0.25 mL 5 x 31 mm

Micro-insert, N 9|N 10|N 11, 5.7x29.0 mm, 0.1 mL, conical, clear, spring 702818

702818

Insert for vials with wide opening, clear, with plastic spring 0.1 mL 5.7 x 29 mm

4 in stock

Micro-insert, N 9|N 10|N 11, 5.7x29.0 mm, 0.1 mL, conical, PP, spring702819

702819

0.1 mL Polypropylene Insert for wide opening outer diameter: 5.7 mm, outer height: 29 mm transparent, with integrated spring pack of 100

Micro-insert, N 9|N 10|N 11, 5.7x29.0 mm, 0.1 mL,conical, clear,spring,silanized 702818.1

702818.1

Insert for vials with wide opening, clear, with plastic spring, silanized 0.1 mL 5.7 x 29 mm

Micro-insert, N 9|N 10|N 11, 6.0x31.0 mm, 0.2 mL, conical, 15 mm tip, clear 702813

702813

Insert for vials with wide opening, clear, conical, 15 mm tip 0.2 mL 6 x 31 mm

Micro-insert, N 9|N 10|N 11, 6.0x31.0 mm, 0.25 mL, conical, 12 mm tip, clear 702716

702716

Insert for vials with wide opening, clear, conical, 12 mm tip 0.25 mL 6 x 31 mm

Micro-insert, N 9|N 10|N 11, 6.0x31.0 mm, 0.3 mL, flat bottom, clear 702825

702825

Insert for vials with wide opening, clear, flat bottom 0.3 mL 6 x 31 mm

Micro-insert, N 9|N 10|N 11, 6.0x31.0 mm,0.2 mL,conical,15mm tip,clear,silanized 702077

702077

Insert for vials with wide opening, clear, conical, 15 mm tip, silanized 0.2 mL 6 x 31 mm

Molybdatophosphoric acid spr. 814302

814302

Molybdatophosphoric acid spray reagent pack of 100 mL __UN 3316 Chemical kit 9 II 0.100 L ADR/GGVSEB M11 (E) ADR 3.3.1/251: LQ PAX 960 10 Kg CAO 960 10 Kg

Natriumcitrat 2.5 g 814029

814029

Sodium citrate pack of 2.5 g in 100 mL bottle

NUCLEODUR 100-50 C18 ec, 100 g 713550.0100

713550.0100

NUCLEODUR 100-50 C18 ec pack of 100 g in glass container

Nut 1/16" with 1/16" bore, 5 p , HPLC accessories 718583

718583

Nut 1/16" with bore suitable for 1/16" capillary tube pack of 5

OPTIMA 1701 MS, 0.25 mm ID, 0.25 µm, 30m 726630.30

726630.30

Capillary column OPTIMA 1701 MS ID: 0.25 mm, film thickness: 0.25 µm length: 30 m pack of 1

O-ring for VP guard column holder 8 mm , HPLC accessories 718975

718975

O-ring for VP guard column holder 8 mm (718251) pack of 2

PB FFAP, 0,25 mm ID, 0,25 µm, 10 m 723116.10

723116.10

Capillary column PERMABOND FFAP ID: 0.25 mm, film thickness: 0.25 µm length: 10 m

PB Silane, 0,32 mm ID, 50 m 723409.50

723409.50

Capillary column PERMABOND Silane ID: 0.32 mm, length: 50 m

PE Plug N8-1, SV, tr 702807

702807

N 8 PE plug, transparent, for use with 70202.1 and 702017

PE push on cap N 20, bev.HS crimp, c. hole, Butyl b./PTFE gray,1.3mm,unassembled 70242

70242

N 20 PE cap, transparent, for beveled HS crimp neck N 20, center hole 4.3 mm, height 8.4 mm Butyl beige / PTFE gray, unassembled (separate parts)55° shore A 1.3 mm

PE push on cap N 20, beveled HS crimp neck, transparent, center hole, no liner 70266

70266

N 20 PE cap, transparent, for beveled HS crimp neck N 20, center hole 4.3 mm, height 8.4 mm no liner

PE push on cap N 20, flat crimp neck, center hole, Natural Rubber/TEF, 1.3 mm 702129

702129

N 20 PE cap, transparent, for flat DIN crimp neck N 20, center hole 4.3 mm, height 9.1 mm Natural rubber red-orange / TEF colorless, ready assembled 45° shore A 1.3 mm

PE push on cap N 20, flat crimp neck, transparent, center hole, no liner 70267

70267

N 20 PE cap, transparent, for flat DIN crimp neck N 20, center hole 4.3 mm, height 9.1 mm no liner

PE push on cap N 20, flat crimp neck,c.hole,Butyl b./PTFE gray,1.3mm,unassembled 70240

70240

N 20 PE cap, transparent, for flat DIN crimp neck N 20, center hole 4.3 mm, height 9.1 mm Butyl beige / PTFE gray, unassembled (separate parts) 55° shore A 1.3 mm 100 each